| 监控室设备安装需要注意的事项 |
| 添加时间：2019/10/29 16:53:33 浏览次数： |
| 监控室设备安装需要注意的事项 Precautions for equipment installation in monitoring room 机柜内部的设备和硬件安装，应在机柜定位并加固完毕后进行，安装在机柜内部的设备需端正和牢固。机架上用以固定的螺丝、垫片、弹簧垫圈都应该按照要求，固定紧实、不得遗漏。保证监控室内电源火线、零线、地线按照规范连接。控制室内所有线缆应根据设备安装位置设置电缆槽和进线孔，排列、捆扎整洁、编号、并有永久性标志。 The equipment and hardware installation inside the cabinet shall be carried out after the cabinet is positioned and reinforced, and the equipment installed inside the cabinet shall be upright and firm. The screws, washers and spring washers used for fixing on the frame shall be firmly fixed as required without omission. Ensure that the live wire, zero wire and ground wire of the power supply in the monitoring room are connected according to the specifications. All cables in the control room shall be arranged with cable trough and wire inlet hole according to the installation position of the equipment, arranged, tied neatly, numbered and permanently marked. |
| 上一页 摄像头安防监控系统是安全监控系统物理原理的应用 |
| 下一页 摄像头的固定位置很重要 |
Copyright © 技术支持：遨游网络