一、监控摄像头的安装方法：
1. Installation method of surveillance camera:
1、在强电磁干扰环境下，监控摄像头安装应与地绝缘隔离。
1. Installation of surveillance camera should be isolated from ground insulation under strong electromagnetic interference environment.
2、在满足监视目标视场范围要求的条件下，其安装高度：室内离地不宜低于2.5m，室外离地不宜低于3.5m。
2. Under the condition of meeting the requirement of the field of view of the surveillance target, the installation height should not be less than 2.5 m indoor and 3.5 m outdoor.
3、电梯厢内的监控摄像头应安装在厢门上方的左或右侧，并能有效监视电梯厢内乘员面部特征。
3. The surveillance camera in the elevator compartment should be installed on the left or right side above the door, and can effectively monitor the facial features of the passengers in the elevator compartment.
4、监控摄像头及其配套装置，如镜头、摄像机防护罩、支架、雨刷等，安装应牢固，运转应灵活，应注意防破坏，并与周边环境相协调。
4. Monitoring cameras and their supporting devices, such as lenses, camera shields, brackets, wipers, etc., should be firmly installed, flexible in operation, attention should be paid to damage prevention and coordination with the surrounding environment.
5、信号线和电源线应分别引入，外露部分用软管保护，并不影响云台的转动。
5. Signal line and power line should be introduced separately. The exposed part should be protected by hose, which does not affect the rotation of the platform.
二、监控摄像头控制设备安装：
2. Installation of control equipment for surveillance cameras:
1、控制室内所有线缆应根据设备安装位置设置电缆槽和进线孔，排列、捆扎整齐，编号，并有永久性标志。
1. All cables in the control room should be arranged and bundled neatly, numbered and marked permanently according to the installation position of the equipment.
2、控制台、机柜（架）安装位置应符合设计要求，安装应平稳牢固、便于操作维护。机柜架）背面、侧面离墙净距离应符合维修要求。
2. The installation position of console and cabinet (rack) should conform to the design requirements, and the installation should be stable and firm, easy to operate and maintain. The net distance from the back and side of the rack to the wall should meet the maintenance requirements